{"id":12414,"date":"2026-01-05T15:09:19","date_gmt":"2026-01-05T11:39:19","guid":{"rendered":"https:\/\/karduk.com\/?p=12414"},"modified":"2026-04-20T09:16:55","modified_gmt":"2026-04-20T05:46:55","slug":"pre-feasibility-study-plan-for-production-vehicle-batteries","status":"publish","type":"post","link":"https:\/\/karduk.com\/en\/12414\/pre-feasibility-study-plan-for-production-vehicle-batteries\/","title":{"rendered":"Pre-Feasibility study\u00a0 plan for Production Vehicle batteries"},"content":{"rendered":"

In Pre-Feasibility study plan for Production Vehicle batteries Technical, Financial, and Economic aspects of the project are explained<\/strong><\/p>\n

A battery is a device in which electrical energy is stored through chemical reactions so that it can be used when needed. The car battery is a rechargeable power source for starting a vehicle, which sends a voltage to start the engine to provide spark in various internal combustion engines. It also supplies the necessary electricity to the headlights, radio and windshield wipers.<\/p>\n

The battery is responsible for supplying energy to the car’s engine from 30 to 70 amps depending on the type of vehicle. So that when the car is started, the car’s electric generator, which is usually the car’s alternator, can generate electricity for the rest of the car’s parts and the engine can start. At such a time, the car usually needs energy equivalent to 13.5 to 14.5 volts.<\/p>\n

And if the battery itself tries to power the electrical systems of the engine and transmission controls, the ignition and fuel system, and the audio and climate controls, it will be drained in a short period of time. The four common types of batteries used in cars are: lithium-ion batteries, lead-acid batteries, SLI batteries, and deep-cycle batteries.<\/p>\n

\"<\/p>\n

Most vehicles with internal combustion engines use lead-acid batteries. In general, battery design and construction can be classified as follows:<\/p>\n

A sealed or wet battery is known as a wet cell battery and requires regular charging with distilled water. Valve Regulated Lead Acid (VRLA). A sealed, high-quality battery, also known as a sealed lead acid (SLA) battery. It does not require refilling and does not spill liquid if tipped over. Lithium-ion batteries used in hybrid vehicles may also have a secondary backup lead acid battery.<\/p>\n

The importance of the project<\/strong><\/h2>\n

In today’s world, cars have become an important and essential part of people’s lives in different countries, which are constantly becoming more advanced. This level of demand has caused their production in different countries to expand quantitatively and qualitatively, and they are produced in various designs and models.<\/p>\n

This need has led to the growth of production technology in industrialized countries due to changing consumption patterns and lifestyles. The development of industrial infrastructure, logistics, and transportation has also been effective in the development of automotive manufacturing, such that automobile production has become one of the largest industrial and trade activities in the world.<\/p>\n

\"Production<\/p>\n

The necessity of using a battery in a Vehicle<\/strong><\/h3>\n

Car battery is an element that plays a role in starting any type of vehicle. The suitability of the battery capacity and power with the vehicle’s electrical system will result in a good start of the vehicle. When the battery capacity is low, the starting time increases to start the vehicle. Long-term and continuous starting causes overheating of the starter and is likely to lead to starter failure, and if the battery capacity is greater than the vehicle’s requirement, the life of the vehicle’s starting system will be reduced.<\/p>\n

If the internal resistance of the battery is within reasonable limits, the current generated during starting will increase as the capacity increases. Today, due to the problems of wet batteries, the use of dry, insulated batteries is expanding. Passenger car and van batteries are usually 12-volt, and heavy-duty and diesel vehicles are 24-volt.<\/p>\n

The output of a battery is measured in ampere-hours based on its structure and also in voltage, for example, a 12V and 60AH battery means 12 volts and 60 amps.<\/p>\n

Technical Specifications | Pre-Feasibility study\u00a0 plan for Production Vehicle batteries<\/strong><\/h3>\n

The structure of the vehicle battery system is shown in the figure. The figure below is an example of a six-cell wet cell car battery. Each storage battery cell is made of lead plates that have an alloy grid of sponge lead plates (cathode) and are coated with lead dioxide (anode). The cells are filled with a sulfuric acid solution, which is the electrolyte, to conduct electricity.<\/p>\n

\"<\/p>\n

Product Classification | Pre-Feasibility study\u00a0 plan for Production Vehicle batteries<\/strong><\/h3>\n

Currently, the 8 common types of batteries used in the automotive industry can be listed as follows:<\/p>\n